CAKEWALK PRO AUDIO User Manual page 364

9-30
If your audio hardware is conÞgured for stereo playback, Wave Þles are
created in stereo; if your audio hardware is conÞgured for monophonic
playback, the Wave Þle is created in mono.
To Export Audio to RealAudio Format
1. Make sure all the tracks you want to export are unmuted and
unarchived.
2. Make a time selection, if necessary. If any tracks use real-time
effects such as reverb or delay, select your whole project plus an
extra measure or two at the end so you won't cut off the reverb
"tail."
3. Choose Tools-Mixdown Audio-Export to File(s) to display the
Mixdown Audio/Export to File(s) dialog box.
4. Select a destination folder using the Look In field.
5. Enter a file name.
6. Choose Real Audio from the Files of type drop-down list.
7. In the Format filed, select one of the following options:
• Mix to Stereo File(s)--All unmuted and unarchived tracks are
mixed down to a single stereo track.
• Mix to Separate Left and Right tracks--All unmuted and
unarchived tracks are mixed down to two mono tracks, left
and right.
Mix to Mono File(s)--All unmuted and unarchived tracks are
•
mixed down to a single mono track
8. In the Source Bus(ses) field, select a sound card or sound cards
from the list. If you select more than one, you can select the Each
Source to Separate Mix checkbox to create separate files for each
device selected in the Source Bus(ses) field.
9. In the Mix Enables field, select the effects you want to include in
your new file.
10. Click Export.
The RealAudio settings dialog box appears.
11. Select options as described in the table below and click OK.
The audio is compacted and exported to the RealAudio file.
.