Osd - Camera Setup > Special - Digital Watchdog PTZ39X User Manual

OSD -
CAMERA SETUP > SPECIAL
1
ZOOM CAMERA SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
FOCUS MODE
DIGITAL ZOOM
IMAGE FLIP
FLICKERLESS
DIS MODE
<WHITE BALANCE SETUP>
<AUTO EXPOSURE SETUP>
<SPECIAL>
BACK
EXIT
2
SPECIAL
- - - - - - - - - - - - - - - - - - - - - - - - - - -
DNR
ZOOM SPEED
DETAIL
AGC COLOR SUP
PIP
POSI/NEGA
BACK
EXIT
1
SEMIAUTO
ON
OFF
OFF
DIS MODE
OFF
Sets the Digital Image Stablization mode.
<SPECIAL>
Opens SPECIAL SETUP menu.
Press
2
Near/Enter
Sets the special function related to the image.
Key
DNR
Reduces the noise caused by AGC. If set towards HIGH, the noise
MIDDLE
will be reduced but the ghost effect on moving objects will be
4
increased.
2
MIDDLE
ZOOM SPEED
OFF
+
The speed it takes to adjust zoom in/zoom out. 1 is the slowest, and
4 is the fastest.
DETAIL
The distinction are separated into 4 levels.
If the level is high, the outline is clear but the noise is increased.
AGC COLOR SUP
The color range of the noise caused by AGC can be reduced.
If set to HIGH, the color range of the noise will decrease, but the
overall quality of the color will also decrease
PIP
Turn ON to display the sub-screen.
Sub-screen will appear on the bottom right side of the main display.
Even though the main display enables digital zoom, the sub-screen
will only display with maximum optical zoom.
POSI/NEGA
If set as +, the camera will produce the normal image; however, if set
as - , the brightness signal and color signal of the produced image
will be reversed.
ZOOM CAMERA SETUP
ON / OFF
SPECIAL
OFF / LOW / MIDDLE / HIGH / USER 1~16
1 ~ 4
0 ~ 3
LOW / MIDDLE / HIGH
ON / OFF
+ / -
37