Osd - Camera Setup > Special - Digital Watchdog x39 User Manual

OSD -
CAMERA SETUP > SPECIAL
1
ZOOM CAMERA SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
FOCUS MODE SEMIAUTO
ON
DIGITAL ZOOM
IMAGE FLIP OFF
FLICKERLESS OFF
DIS MODE OFF
<WHITE BALANCE SETUP>
<AUTO EXPOSURE SETUP>
<SPECIAL>
BACK
EXIT
Press
Near/Enter
Key
2
SPECIAL
- - - - - - - - - - - - - - - - - - - - - - - - - - -
DNR MIDDLE
ZOOM SPEED 4
DETAIL 2
AGC COLOR SUP MIDDLE
PIP OFF
POSI/NEGA +
BACK
EXIT
1 ZOOM CAMERA SETUP
DIS MODE
ON / OFF
Sets the Digital Image Stablization mode.
<SPECIAL>
Opens SPECIAL SETUP menu.
SPECIAL
2
Sets the special function related to the image.
DNR OFF / LOW / MIDDLE / HIGH / USER 1~16
Reduces the noise caused by AGC. If set to HIGH, the noise
will be reduced but the ghost effect on moving objects will
increase.
ZOOM SPEED
1 ~ 4
The speed it takes to adjust zoom in/zoom out. 1 is the sloweset,
and 4 is the fastest.
DETAIL
0 ~ 3
The distinction is separated into 4 levels.
If the level is high, the outline is clear, but the noise is increased.
AGC COLOR SUP LOW / MIDDLE / HIGH
The color range of the noise caused by AGC can be reduced.
If set to HIGH, the color range of the noise will decrease, but the
overall quality of the color will also decrease.
PIP
ON / OFF
Turn ON to display the sub-screen.
Sub-screen will appear on the bottom right corner of the main
display. Even though the main display enables digital zoom, the
sub-screen will only display with maximum optical zoom.
POSI/NEGA
+ / -
If set as +, the camera will produce the normal image; however, if set
as -, the brightness signal and color signal of the produced image
will be reversed.
48