Osd - Function Setup > Group Setup - Digital Watchdog x39 User Manual

OSD -
FUNCTION SETUP > GROUP SETUP
1
FUNCTION SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
<PRESET SETUP>
<SCAN SETUP>
<PATTERN SETUP>
<GROUP SETUP>
<SCHEDULE SETUP>
BACK
EXIT
Press
Near/Enter
Key
2
GROUP SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
GROUP NO.
UNDEFINED
CLEAR GROUP CANCEL
<EDIT GROUP>
BACK
EXIT
Select <EDIT GROUP>,
Press Near/Enter Key
3
EDIT GROUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1 NONE
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL [NEAR:EDIT]
Press
Near/Enter
Key
4
EDIT GROUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1 NONE
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE [NEAR:EDIT ACT]
CANCEL [FAR :EDIT END]
Press
Near/Enter
Key
5
EDIT GROUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1 NONE
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE [ :MOVE CURSOR]
CANCEL [ : CHANGE VAL.]
2 GROUP SETUP
The group function allows you to run sequence of presets, pattern,
and/or scans. Maximum 8 group can be stored. Each group can
have max 20 action entities which can be preset, pattern, or scan.
The preset speed and the repeat number of pattern & scan can
be set in group setup. Dwell time between actions can also be
adjusted.
Dwell Time
Preset
1
1
GROUP NO.
Selects group number to edit. If a selected group number is not
defined, "UNDEFINED" will be displayed under the selected group
number.
CLEAR GROUP
Deletes the data in the current group.
<EDIT GROUP>
Starts editing group.
1
EDIT GROUP - Initial Screen
3
Press Near or Enter key in "NO" list to start group setup.
ACTION NO.
DWELL TIME
Sets dwell time between function by moving joystick up/down.
OPT
Represents preset speed (2~360) when preset is selected. It should
be the number of repetition (1~255) when pattern or scan is
1 selected for "ACTION."
EDIT GROUP – Select Function Sequence
4
Note that maximum 20 functions are allowed in a group.
Move cursor up/down and press Near or Enter key to set.
EDIT GROUP - Assign Function
5 6
Set up ACTION, DWELL and OPT. Note that selected item is
displayed in reverse. Move cursor left/right to select items and
move cursor up/down to change each value.
1
41
Scan3
Pattern5 Pattern5
1
1 Times n Times
Max. 20 Entities
1 ~ 8
CANCEL / OK
NONE / PRESET 1~128(Excluding 95) /
PATTERN 1~4 / SCAN 1~4
00:03 ~ 04:00 (min:sec)
PRESET: 2~360 / PATTERN & SCAN: 1~255
Preset
120