Table of Contents
Advertisement
3
OSD -
FUNCTION SETUP > GROUP SETUP
1
FUNCTION SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
<PRESET SETUP>
<SCAN SETUP>
<PATTERN SETUP>
<GROUP SETUP>
<SCHEDULE SETUP>
BACK
EXIT
Press Near/Enter Key
2
GROUP SETUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
GROUP NO.
UNDEFINED
CLEAR GROUP
<EDIT GROUP>
BACK
EXIT
Select <EDIT GROUP>,
Press Near/Enter Key
3
EDIT GROUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1 NONE
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
CANCEL
[NEAR:EDIT]
Press Near/Enter Key
4
EDIT GROUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1 NONE
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
[NEAR:EDIT ACT]
CANCEL
[FAR :EDIT END]
Press Near/Enter Key
5
EDIT GROUP
- - - - - - - - - - - - - - - - - - - - - - - - - - -
NO. ACTION NO. DWELL OPT
- - - - - - - - - - - - - - - - - - - - - - - - - -
1
NONE
2 NONE
3 NONE
4 NONE
5 NONE
- - - - - - - - - - - - - - - - - - - - - - - - - -
SAVE
[
:MOVE CURSOR]
CANCEL
[
: CHANGE VAL.]
1
CANCEL
1
1
1
2
GROUP SETUP SCREEN
The group function allows you to run sequence of presets, pattern,
and/or scans. Maximum 8 groups can be stored. Each group can
have a maximum of 20 action entities which can be preset, pattern,
or scan.
The preset speed and the repeat number of patter & scan can be
confiugred in group setup. Dwell time between actions can also
be adjusted.
Dwell Time
Preset
Pattern5
Pattern5
1
1 Times
Max. 20 Entities
GROUP NO.
1 ~ 8
Selects group number to edit. If a selected group number is not defined,
UNDEFINED will be displayed under the selected group number.
CLEAR GROUP
CANCEL / OK
Deletes data in the current group.
<EDIT GROUP>
Starts editing group.
3
EDIT GROUP - Initial Screen
Select a # from the list to begin group setup.
ACTION NO.
NONE / PRESET 1~128(Excluding 95) /
PATTERN 1~4 / SCAN 1~4
DWELL TIME
00:03 ~ 04:00 (min:sec)
Sets dwell time between function by moving joystick up/down.
OPT
PRESET: 1~360 / PATTERN & SCAN: 1~255
Represents preset speed (1~360) when preset is selected. It should
be the number of repetition (1~255), when pattern or scan is
selected for ACTION.
EDIT GROUP – Select Function Sequence
4
Note that a maximum of 20 functions are allowed in a group.
Move cursor up/down and press Near or Enter key to set up.
EDIT GROUP - Assign Function
5 6
Set up ACTION, DWELL, and OPT. Note that selected item is
displayed in reverse. Move cursor left/right to select items and
move cursor up/down to change each value.
30
Scan3
Preset
1
120
n Times
Advertisement
Table of Contents
