Multiple Sheets Pulled Together; Paper Misfeeds; Troubleshooting Paper Jams - Xerox WorkCentre 6605 User Manual

Color multifunction printer
Hide thumbs Also See for WorkCentre 6605:
Table of Contents

Advertisement

Troubleshooting

Troubleshooting Paper Jams

This section includes:

Multiple Sheets Pulled Together ......................................................................................... 248

Paper Misfeeds .................................................................................................................. 248

Label and Envelope Misfeeds ............................................................................................ 249
Paper Jam Message Stays On ........................................................................................... 249
Jams During Automatic 2-Sided Printing ............................................................................ 249
Multiple Sheets Pulled Together
Probable Causes
The paper tray is too full.
The edges of the paper are not even.
The paper is moist from humidity.
Too much static electricity is present.
Using unsupported paper.
Humidity is too high for coated paper.
Paper Misfeeds
Probable Causes
The paper is not correctly positioned in the
tray.
The paper tray is too full.
The paper guides are not correctly adjusted
to the paper size.
The tray contains warped or wrinkled paper. Remove the paper, smooth it out, and reload it. If it still misfeeds,
The paper is moist from humidity.
Using paper of the wrong size, thickness, or
type.
248
WorkCentre 6605 Color Multifunction Printer
User Guide
Solutionst
Remove some of the paper. Do not load paper past fill line.
Remove the paper, align the edges, and then reload it.
Remove the paper from the tray, and replace it with new dry
paper.
Try a new ream of paper.
®
Use only Xerox
approved paper. For details, see
Paper
on page 112.
Feed paper one sheet at a time.
Solutions
• Remove the misfed paper and reposition it properly in the tray.
• Adjust the paper guides in the tray to match the size of the
paper.
Remove some of the paper. Do not load paper past the fill line.
Adjust the paper guides in the tray to match the size of the paper.
do not use that paper.
Remove the moist paper and replace it with new, dry paper.
®
Use only Xerox
approved paper. For details, see
Paper
on page 112.
Supported
Supported

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents