Adjusting For The Paper Type - Xerox WorkCentre 6605 User Manual

Maintenance
6. Repeat the process for the right side calibration lines, RY, RM, and RC.
7. Align a straight edge through the middle of the white zone in each of the PY, PM, and PC charts.
Circle the number at the end of each chart that represents the middle of the white zone.
8. Touch Enter Registration Value.
9. To enter values for each LY, LM, and LC fields, use - and + to adjust the value to what you
circled in step 5.
10. Touch Next.
11. To enter values for each RY, RM, and RC fields, use - and + to adjust the value to what you
circled in step 6.
12. Touch Next.
13. To enter values for each PY, PM, and PC fields, use - and + to adjust the value to what you
circled in step 7.
14. Touch OK.
15. Print another Registration Chart, then repeat the process until you complete the color
registration corrections.
16. Touch the Back arrow to return to the next menu level, or press the Services Home button to
return to Service Home.

Adjusting for the Paper Type

Use Adjust Paper Type to compensate for paper thickness within a paper type. If the printed image is
too light, use a heavier setting for the paper you are using. If the printed image is mottled or
blotchy-looking, decrease the setting for the paper you are using.
214 WorkCentre 6605 Color Multifunction Printer
User Guide