Xerox WorkCentre 6605 User Manual page 64

Installation and Setup
Setting the Date and Time
1. Use this menu to configure general settings of the printer. For example, time to Energy Saver
mode, alarm settings, and so on.
2. Touch Date and Time.
3. To select your time zone:
a. Touch Time Zone.
b. Use the Up or Down arrows to navigate, select your geographic region and time zone, then
touch OK.
4. To set the date:
a. Touch Date.
b. Touch Format, touch the date format that you wish to use, then touch X to close the list.
c. Touch Month, then use the keyboard to enter the month.
d. Touch Day, then use the keyboard to enter the date.
e. Touch Year, then use the keyboard to enter the year.
f. Touch OK.
5. To set the time:
a. Touch Time.
b. To select the format, touch 12 Hour or 24 Hour.
c. Touch Hour, then use the keypad to enter the hour.
d. Touch Minute, then use the keypad to enter the minutes.
6. Touch OK.
7. To return to the General menu, touch the Back arrow.
Setting the Measurement Units
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Touch System Settings, then touch General.
4. Touch Measurement.
5. To select an option for units, touch millimeter (mm) or inches (").
6. Touch OK.
Setting the Display Brightness
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Touch System Settings, then touch General.
4. Touch Display Brightness.
5. Touch - or + on the display or use the keypad to enter a number from 1 through 10.
6. Touch OK.
64 WorkCentre 6605 Color Multifunction Printer
User Guide