Xerox WorkCentre 6605 User Manual page 256

Troubleshooting
Symptom
Slanted printing.
Colors are blurry or there is
white area around objects.
Blotchy or mottled images.
Spots or lines appear at regular
intervals on the prints.
256 WorkCentre 6605 Color Multifunction Printer
User Guide
Probable Causes
The paper guides in the trays
are not set correctly.
Color-to-color alignment is not
correct.
The paper is too light or too
thin.
The paper is damp.
The humidity is too high.
One or more of the
components in the paper path
is marking the paper.
Solutions
Reset the paper tray guides. For details,
see Loading Paper on page 116.
Perform an automatic color registration
adjustment. For details, see
Registration on page 212.
Choose a different paper type at the control
panel, in the application, and in the printer
driver.
Replace the paper.
Reduce the humidity in the room or move
the printer to a new location.
To determine the cause, measure the
distance between the print defects.
• 75.3 mm (3 in.) - Imaging Unit
• 28.3 mm (1.1 in.) - Imaging Unit
• 31.1 mm (1.2 in.) - Imaging Unit
• 32.3 mm (1.3 in.) - Imaging Unit
• 25.1 mm (1 in.) - Transfer Belt
• 56.5 mm (2.2 in.) - Transfer Roller
• 82.3 mm (3.2 in.) - Fuser
If the repeating defects match one of these
distances, replace that item.
Color