Copy and Scan Problems
If the copy or scan quality is poor, refer to the following table.
Symptoms
Lines or streaks only present in copies
made from the document feeder.
Spots present in copies taken from the
document glass.
The reverse side of the original is showing
on the copy or scan.
Image is too light or too dark.
Colors are inaccurate.
If the problem persists, go to
Solutions
There is debris on the document glass. When scanning, the
paper from the document feeder passes over the debris creating
lines or streaks. Clean all glass surfaces with a lint-free cloth.
There is debris on the document glass. When scanning, the
debris creates a spot on the image. Clean all glass surfaces with
a lint-free cloth.
Turn on Background Suppression.
• Copy: Use the Image Quality settings to lighten, darken, or
adjust contrast.
• Scan: Use the Advanced Settings Tab to lighten, darken, or
adjust contrast.
• Copy: Use the Image Quality settings to adjust color balance.
• Scan: Confirm the correct Original Type is set.
www.xerox.com/office/WC6605support
for online support information.
WorkCentre 6605 Color Multifunction Printer
Troubleshooting
257
User Guide