Emergency Turn Off; Telephone Line Cord - Xerox WorkCentre 6605 User Manual

•
Do not use a ground adapter plug to connect the printer to an electrical outlet that does not have
a ground connection terminal.
WARNING: Avoid the potential of electrical shock by ensuring that the printer is grounded
properly. Electrical products can be hazardous if misused.
•
Only use an extension cord or power strip designed to handle the electrical current capacity of
the printer.
•
Verify that the printer is plugged into an outlet that is providing the correct voltage and power.
Review the electrical specification of the printer with an electrician if necessary.
•
Do not place the printer in an area where people can step on the power cord.
•
Do not place objects on the power cord.
•
Replace the power cord if it becomes frayed or worn.
•
Do not unplug or plug the power cord while the printer is turned on.
•
To avoid electrical shock and damage to the cord, grasp the plug when unplugging the power
cord.
•
The electrical outlet must be near the printer and must be easily accessible.
The power cord is attached to the printer as a plug-in device on the back of the printer. If it is
necessary to disconnect all electrical power from the printer, disconnect the power cord from the
electrical outlet.

Emergency Turn Off

If any of the following conditions occur, turn off the printer immediately and disconnect the power
cord from the electrical outlet. Contact an authorized Xerox service representative to correct the
problem if:
•
The equipment emits unusual odors or makes unusual noises.
•
The power cable is damaged or frayed.
•
A wall panel circuit breaker, fuse, or other safety device has been tripped.
•
Liquid is spilled into the printer.
•
The printer is exposed to water.
•
Any part of the printer is damaged.

Telephone Line Cord

WARNING: To reduce the risk of fire, use only No. 26 American Wire Gauge (AWG) or larger
telecommunication line cord.
WorkCentre 6605 Color Multifunction Printer
Safety
15
User Guide