Assigning The Printer Ip Address; Assigning The Ip Address Automatically - Xerox WorkCentre 6605 User Manual

Color multifunction printer
Hide thumbs Also See for WorkCentre 6605:
Table of Contents

Advertisement

Assigning the Printer IP Address

This section includes:

Assigning the IP Address Automatically ............................................................................... 51

Finding the IP Address of the Printer .................................................................................... 52
Changing the IP Address Using CentreWare Internet Services ............................................ 52
Assigning the IP Address Manually ...................................................................................... 53
By default, the printer is set to acquire an IP address from the network server using DHCP. Network
addresses assigned by DHCP are temporary, however. After a specified time, the network could
assign a new IP address to the printer. If the print driver is set to an IP address that changes
periodically, you can experience connectivity issues. To avoid problems, or if your network
administrator requires a static IP address for the printer, you can assign the IP address to the printer.
Note:
You can view the IP address of your printer on the control panel or on the Configuration
Report. For details, see
See also:
Assigning the IP Address Manually
Finding the IP Address of Your Printer
Assigning the IP Address Automatically
1.
At the printer control panel, press the Machine Status button.
2.
Touch the Tools tab.
3.
Touch Admin Setting > Network.
4.
Touch Ethernet > TCP/IP > Get IP Address.
5.
To have the printer get an IP address automatically from the server or set its own IP address,
select an option:
DHCP allows your DHCP server to assign an IP address to the printer. This option
enables Dynamic DNS Registration.
Auto IP allows the printer to assign an IP address to itself, in the absence of a
DHCP-capable router or access point.
BOOTP allows the printer to obtain an IP address from a BOOTP server that does not
respond to DHCP requests.
RARP allows the printer to obtain an IPv4 address from an administrative host server.
Note:
For best results in most networks, select DHCP/AutoIP.
Printing the Configuration Report
on page 51
on page 30
on page 29.
WorkCentre 6605 Color Multifunction Printer
Installation and Setup
51
User Guide

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents