Xerox WorkCentre 6605 User Manual page 227

3. Remove the paper from the paper tray.
Keep the paper wrapped and away from humidity and dirt.
4. Lift and carry the printer as shown in the illustration.
Notes:
•
When moving the printer, do not tilt it more than 10 degrees to the front, back, left, or
right. Tilting the printer more than 10 degrees can cause toner spillage.
•
When moving the printer over a long distance, remove the imaging units and toner
cartridges to prevent toner from spilling. Pack the printer inside a box. For a repacking
kit and instructions, go to www.xerox.com/office/WC6605support.
CAUTION: Failure to repackage the printer properly for shipment can result in damage not
covered by the Xerox
®
Xerox Warranty, Service Agreement, or Total Satisfaction Guarantee do not cover damage to
the printer caused by improper moving.
After moving the printer:
1. Reinstall any parts you removed.
2. Reconnect the printer to the cables and power cord.
3. Plug in and turn on the printer.
®
Warranty, Service Agreement, or Total Satisfaction Guarantee. The
WorkCentre 6605 Color Multifunction Printer
Maintenance
227
User Guide