Loading Documents For Scanning; Duplex Automatic Document Feeder Guidelines - Xerox WorkCentre 6605 User Manual

Scanning

Loading Documents for Scanning

Position the original document as shown.
Document Glass
Lift the duplex automatic document
feeder, then place the original face down
in the upper left corner of the document
glass.

Duplex Automatic Document Feeder Guidelines

The duplex automatic document feeder accommodates the following originals:
•
Width: 139.7–215.9 mm (5.5–8.5 in.)
•
Length: 139.7–355.6 mm (5.5–14 in.)
•
Weight:
•
1-sided documents: 50–125 g/m²
•
2-sided documents: 60–125 g/m²
Follow these guidelines when loading originals into the duplex automatic document feeder:
•
Load originals face up so that the top of the document enters the feeder first.
•
Place only loose sheets of paper in the duplex automatic document feeder.
•
Adjust the paper guides so that they fit against the originals.
•
Insert paper in the duplex automatic document feeder only when ink on the paper is dry.
•
Do not load originals above the MAX fill line.
162 WorkCentre 6605 Color Multifunction Printer
User Guide
Duplex Automatic Document Feeder
Insert originals face up with the top of the page
entering the feeder first. Adjust the paper guides
so they fit against the originals.