Xerox WorkCentre 6605 User Manual page 253

Symptom
Copy colors are wrong color.
Stray black dots or white areas
(dropouts).
• Vertical black or color
streaks or multiple colored
streaks or lines.
• Streaks in only one color.
Probable Causes
The color balance is not
adjusted properly.
The paper is outside the
recommended specification
range.
There is debris on the rollers.
The toner cartridges are not
®
Xerox toner cartridges.
The toner cartridges are not
®
Xerox toner cartridges.
Debris in the printer is dragging
against the toner before it is
fused.
There is a problem with the
toner cartridge for that color.
WorkCentre 6605 Color Multifunction Printer
Solutions
Adjust the color balance:
1. Press the Machine Status button.
2. Touch Tools > Copy Defaults.
3. Scroll to, then select Color Balance.
4. Select a color, then adjust the dark,
midtones, and light shades for each
color.
Note: - numbers reduce the color, +
numbers increase the color.
5. Click OK.
6. To return to the Services Home menu,
press the Services Home button.
Replace the paper with a recommended
size and type, and confirm that your control
panel and print driver settings are correct.
For details, see Supported Paper
112.
Wipe the feed rollers with a clean damp
cloth to remove debris from the rollers.
Note: Do not touch the transfer roller or the
exposed end of the transfer belt.
Ensure that the toner cartridges meet
specifications and replace them if
necessary. For details, see
on page 221.
Ensure that the toner cartridges meet
specifications and replace them if
necessary. For details, see
on page 221.
Remove any debris or paper scraps from
the paper path under the rear cover.
Check the toner cartridge for damage and
replace if necessary. For assistance, go to
®
the Xerox Support website at
www.xerox.com/office/WC6605support
Troubleshooting
on page
Consumables
Consumables
253
User Guide