Adding A Lan Fax Printer For Macintosh - Xerox WorkCentre 6605 User Manual

Adding a LAN Fax Printer for Macintosh

After installing the LAN fax driver on a Macintosh computer, use Bonjour to set up your printer. You
can also add the printer using the IP Address of the printer for an LDP/LPR connection. For
non-network printers, create a desktop USB connection.
To add the printer using Bonjour:
1. From the computer Applications folder or from the dock, open System Preferences.
2. Click Print & Fax.
The list of printers appears on the left of the window.
3. Click the plus button (+) under the list of printers.
4. Click the Default icon at the top of the window.
5. Select your printer from the list and click Add.
Note: If the printer is not detected, ensure that the printer is on and that the cable is connected
properly.
6. In the Print Using drop down list, choose Select Printer Software.
7. Select the appropriate Xerox
8. Click Add.
To add the printer by specifying the IP address:
1. From the computer Applications folder or from the dock, open System Preferences.
2. Click Print & Fax.
The list of printers appears on the left of the window.
3. Click the plus button (+) under the list of printers.
4. Click IP.
5. From the Protocol drop down menu, select the Protocol.
6. In the Address field, enter the IP address of the printer.
7. In the Name field, enter the name of the printer.
8. In the Print Using drop down list, choose Select Printer Software.
9. Select the appropriate Xerox
10. Click Add.
®
6605 LAN fax driver model from the list, then click OK.
®
6605 LAN fax driver model from the list, then click OK.
WorkCentre 6605 Color Multifunction Printer
Installation and Setup
109
User Guide