Cleaning The Interior - Xerox WorkCentre 6605 User Manual

Maintenance
2. Wipe the feed rollers with a dry soft lint-free cloth or paper towel until they are clean.
Note: If the duplex automatic document feeder rollers get stained with toner or debris, they can
cause stains on the documents. To remove the stains, use a soft lint-free cloth dampened with a
neutral detergent or water.

Cleaning the Interior

Clean the interior of the printer regularly to prevent stains inside the printer that can deteriorate
printing quality. Clean the printer interior whenever you replace an imaging unit.
After clearing paper jams or replacing a toner cartridge, inspect the inside of the printer before
closing the printer covers.
•
Remove any remaining pieces of paper or debris. For details, see
237.
•
Remove any dust or stains with a dry, clean cloth.
WARNING: Never touch a labeled area on or near the heat roller in the fuser. You can get
burned. If a sheet of paper is wrapped around the heat roller, do not try to remove it immediately.
Switch off the printer immediately and wait 40 minutes for the fuser to cool. Try to remove the jam
after the printer has cooled.
Cleaning the Laser Lenses
If prints have voids or light streaks through one or more color, use the following instructions to clean
the laser lenses.
202 WorkCentre 6605 Color Multifunction Printer
User Guide
Clearing Paper Jams on page