The More Connections Screen - ZyXEL Communications AMG1302-T series User Manual

6.3 The More Connections Screen

The AMG1302/AMG1202-TSeries allows you to configure more than one Internet access connection.
To configure additional Internet access connections click Network Setting > Broadband > More
Connections. The screen differs by the encapsulation you select. When you use the Broadband >
Internet Connection screen to set up Internet access, you are configuring the first WAN
connection.
Figure 22 Network Setting > Broadband > More Connections
The following table describes the labels in this screen.
Table 13 Network Setting > Broadband > More Connections
LABEL
ADSL Connections Table
#
Active
Node Name
VPI/VCI
Encapsulation
Modify
Ethernet Connections Table
AMG1302/AMG1202-TSeries User's Guide
DESCRIPTION
This is an index number indicating the number of the corresponding connection.
This field indicates whether the connection is active or not.
Clear the check box to disable the connection. Select the check box to enable it.
This is the name you gave to the Internet connection.
This field displays the Virtual Path Identifier (VPI) and Virtual Channel Identifier (VCI)
numbers configured for this WAN connection.
This field indicates the encapsulation method of the Internet connection.
The first (ISP) connection is read-only in this screen. Use the Broadband > Internet
Connection screen to edit it.
Click the Edit icon to edit the Internet connection settings. Click this icon on an empty
configuration to add a new Internet access setup.
Click the Remove icon to delete the Internet access setup from your connection list.
Chapter 6 Broadband
81