Remote Management; Chapter 25 Remote Management; Overview; What You Can Do In The Remote Management Screens - ZyXEL Communications AMG1302-T series User Manual

25.1 Overview

Remote management allows you to determine which services/protocols can access which
AMG1302/AMG1202-TSeries interface (if any) from which computers.
The following figure shows remote management of the AMG1302/AMG1202-TSeries coming in from
the WAN.
Figure 116 Remote Management From the WAN
Note: When you configure remote management to allow management from the WAN, you
still need to configure a IP filter rule to allow access.
You may manage your AMG1302/AMG1202-TSeries from a remote location via:
• Internet (WAN only)
• LAN only
• LAN and WAN
• None (Disable)
To disable remote management of a service, select Disable in the corresponding Service Access
field.

25.1.1 What You Can Do in the Remote Management Screens

• Use the WWW screen
from which IP address(es) users can use HTTP to manage the AMG1302/AMG1202-TSeries.
• Use the Telnet screen
from which IP address(es) users can use Telnet to manage the AMG1302/AMG1202-TSeries.
• Use the FTP screen
which IP address(es) users can use FTP to access the AMG1302/AMG1202-TSeries.
AMG1302/AMG1202-TSeries User's Guide
LAN
(Section 25.2 on page
(Section 25.3 on page
(Section 25.4 on page
C
HAPTER

Remote Management

WAN
HTTP
Telnet
224) to configure through which interface(s) and
226) to configure through which interface(s) and
226) to configure through which interface(s) and from
2 5
223