No Security; Basic (Wep Encryption) - ZyXEL Communications AMG1302-T series User Manual

Chapter 7 Wireless LAN
Table 16 Network Setting > Wireless > General
LABEL
Security Mode
Apply
Cancel

7.2.1 No Security

Select No Security to allow wireless stations to communicate with the access points without any
data encryption or authentication.
Note: If you do not enable any wireless security on your AMG1302/AMG1202-TSeries,
your network is accessible to any wireless networking device that is within range.
Figure 27 Wireless > General: No Security

7.2.2 Basic (WEP Encryption)

WEP encryption scrambles the data transmitted between the wireless stations and the access points
(AP) to keep network communications private. Both the wireless stations and the access points
must use the same WEP key.
Note: WEP is extremely insecure. Its encryption can be broken by an attacker, using
widely-available software. It is strongly recommended that you use a more
effective security mechanism. Use the strongest security mechanism that all the
wireless devices in your network support. For example, use WPA-PSK or WPA2-PSK
if all your wireless devices support it, or use WPA or WPA2 if your wireless devices
support it and you have a RADIUS server. If your wireless devices support nothing
stronger than WEP, use the highest encryption level available.
Your AMG1302/AMG1202-TSeries allows you to configure one 64-bit or 128-bit WEP key.
94
DESCRIPTION
Select Basic (WEP) or More Secure (WPA(2)-PSK, WPA(2)) to add security on this
wireless network. The wireless clients which want to associate to this network must have
same wireless security settings as the AMG1302/AMG1202-TSeries. When you select to use
a security, additional options appears in this screen.
Or you can select No Security to allow any client to associate this network without any
data encryption or authentication.
See the following sections for more details about this field.
Click this to save your changes.
Click this to restore your previously saved settings.
AMG1302/AMG1202-TSeries User's Guide