The Upnp Screen; The Ip Alias Screen - ZyXEL Communications AMG1302-T series User Manual

Chapter 8 Home Networking
The following table describes the labels in this screen.
Table 32 Static DHCP: Add/Edit
LABEL
MAC Address
IP Address
OK
Cancel

8.4 The UPnP Screen

Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for
simple peer-to-peer network connectivity between devices. A UPnP device can dynamically join a
network, obtain an IP address, convey its capabilities and learn about other devices on the network.
In turn, a device can leave a network smoothly and automatically when it is no longer in use.
See page 122
Use the following screen to enable or disable the UPnP function on your AMG1302/AMG1202-
TSeries. Click Network Setting > Home Networking > UPnP to display the screen shown next.
Figure 50 Network Setting > Home Networking > UPnP
The following table describes the labels in this screen.
Table 33 Network Setting > Home Networking > UPnP
LABEL
UPnP
Apply
Cancel

8.5 The IP Alias Screen

IP alias allows you to partition a physical network into different logical networks over the same
Ethernet interface. The AMG1302/AMG1202-TSeries supports multiple logical LAN interfaces via its
physical Ethernet interface with the AMG1302/AMG1202-TSeries itself as the gateway for the LAN
network.
126
DESCRIPTION
If you select Manual Input in the Select Device Info field, enter the MAC address of
a computer on your LAN.
If you select Manual Input in the Select Device Info field, enter the IP address that
you want to assign to the computer on your LAN with the MAC address that you will
also specify.
Click OK to save your changes.
Click Cancel to exit this screen without saving.
for more information on UPnP.
DESCRIPTION
Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to
open the web configurator's login screen without entering the AMG1302/AMG1202-
TSeries's IP address (although you must still enter the password to access the web
configurator). Otherwise, select Disable to deactivate UPnP.
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
AMG1302/AMG1202-TSeries User's Guide