The More Connections Screen; More Connections Edit - ZyXEL Communications P-793H v3 User Manual

6.3 The More Connections Screen

The P-79X allows you to configure more than one Internet access connection. To configure
additional Internet access connections click Network > WAN > More Connections. The screen
differs by the encapsulation you select. When you use the WAN > Internet Access Setup screen
to set up Internet access, you are configuring the first WAN connection.
Figure 31 Network > WAN > More Connections
The following table describes the labels in this screen.
Table 16 Network > WAN > More Connections
LABEL
#
Active
Name
PRI/VID
Encapsulation
Modify
Apply
Cancel

6.3.1 More Connections Edit

Use this screen to configure a connection. Click the edit icon in the More Connections screen to
display the following screen.
Chapter 6 WAN Setup
DESCRIPTION
This is an index number indicating the number of the corresponding connection.
This field indicates whether the connection is active or not.
This is the name you gave to the Internet connection.
PRI indicates the 802.1P priority level assigned to traffic sent through this
connection. This displays - when there is no priority level assigned.
VID indicates the 802.1Q VLAN ID number assigned to traffic sent through this
connection. This displays - when there is no VLAN ID number assigned.
This field indicates the encapsulation method of the Internet connection.
The first (ISP) connection is read-only in this screen. Use the WAN > Internet
Access Setup screen to edit it.
Click the Edit icon to edit the Internet connection settings. Click this icon on an
empty configuration to add a new Internet access setup.
Click the Remove icon to delete the Internet access setup from your connection
list.
Click this to save your changes.
Click this to restore your previously saved settings.
P-79X Series User's Guide
53