Chapter 7 Wireless LAN
Table 26 Network Setting > Wireless > Scheduling
LABEL
Time (24-Hour
Format)
Apply
Cancel
7.9 The Advanced Screen
Use this screen to configure advanced wireless settings. Click Network Setting > Wireless >
Advanced, the screen appears as shown.
See
Section 7.10.2 on page 109
Figure 38 Network Setting > Wireless> Advanced
The following table describes the labels in this screen.
Table 27 Network Setting > Wireless> Advanced
LABEL
Fragmentation
Threshold
Output Power
Preamble
106
DESCRIPTION
Specify a time frame during which the schedule would apply.
For example, if you set the time range from 12:00 to 23:00, the wireless LAN will be
turned on only during this time period.
Click this to save your changes.
Click this to restore your previously saved settings.
for detailed definitions of the terms listed in this screen.
DESCRIPTION
This is the maximum data fragment size that can be sent. Enter a value between 256 and
2346.
Set the output power of the AMG1302/AMG1202-TSeries. If there is a high density of APs
in an area, decrease the output power to reduce interference with other APs. Select one
of the following: 100%, 75%, 50% or 25%.
Select a preamble type from the drop-down list menu. Choices are Long or Short. See
the
Appendix D on page 285
for more information.
AMG1302/AMG1202-TSeries User's Guide