ZyXEL Communications AMG1302-T series User Manual page 60

Chapter 4 Tutorials
Click Network Setting > QoS and check Active QoS. Click Apply.
1
Tutorial: Advanced > QoS
Go to Network Setting > QoS > Queue Setup. Click the Edit icon next to an entry to configure
2
a queue.
Select Active and give it a name (Queue1 in this example). Select WAN in the Interface field and
3
1 in the Priority and Weight fields. Then click OK.
Tutorial: Advanced > QoS > Queue Setup
Go to Network Setting > QoS > Class Setup and click Add new Classifier.
4
Select Active and follow the settings as shown in the screen below. Then click OK. Note that you
5
have to select TCP in the IP Protocol field first, then you can configure the source port range
setting.
60
AMG1302/AMG1202-TSeries User's Guide