ZyXEL Communications AMG1302-T series User Manual page 262

Appendix A Setting up Your Computer's IP Address
If you know your DNS server IP address(es), click the DNS tab in the Network Configuration
4
screen. Enter the DNS server information in the fields provided.
Figure 152 Red Hat 9.0: KDE: Network Configuration: DNS
Click the Devices tab.
5
Click the Activate button to apply the changes. The following screen displays. Click Yes to save
6
the changes in all screens.
Figure 153 Red Hat 9.0: KDE: Network Configuration: Activate
After the network card restart process is complete, make sure the Status is Active in the Network
7
Configuration screen.
Using Configuration Files
Follow the steps below to edit the network configuration files and set your computer IP address.
Assuming that you have only one network card on the computer, locate the ifconfig-eth0
1
configuration file (where eth0 is the name of the Ethernet card). Open the configuration file with
any plain text editor.
• If you have a dynamic IP address, enter
shows an example.
262
in the BOOTPROTO= field. The following figure
dhcp
AMG1302/AMG1202-TSeries User's Guide