ZyXEL Communications AMG1302-T series User Manual page 99

Figure 32 More AP: Edit
The following table describes the fields in this screen.
Table 21 More AP: Edit
LABEL
Wireless Network Setup
Wireless
Wireless Network Settings
Wireless Network Name
(SSID)
Hide SSID
Client Isolation
MBSSID/LAN Isolation
Security Level
AMG1302/AMG1202-TSeries User's Guide
DESCRIPTION
Select Enable Wireless LAN to activate wireless LAN.
The SSID (Service Set IDentity) identifies the service set with which a wireless
device is associated. Wireless devices associating to the access point (AP) must
have the same SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the wireless
LAN.
Select this check box to hide the SSID in the outgoing beacon frame so a station
cannot obtain the SSID through scanning using a site survey tool.
Select this to keep the wireless clients in this SSID from communicating with each
other through the AMG1302/AMG1202-TSeries.
Select this to keep the wireless clients in this SSID from communicating with clients
in other SSIDs or wired LAN devices through the AMG1302/AMG1202-TSeries.
Select both Client Isolation and MBSSID/LAN Isolation to allow this SSID's
wireless clients to only connect to the Internet through the AMG1302/AMG1202-
TSeries.
Chapter 7 Wireless LAN
99