ZyXEL Communications AMG1302-T series User Manual page 93

Figure 26 Network Setting > Wireless > General
The following table describes the labels in this screen.
Table 16 Network Setting > Wireless > General
LABEL
Wireless Network Setup
Wireless
Wireless Network Settings
Wireless
Network Name
(SSID)
Hide SSID
Client Isolation
MBSSID/LAN
Isolation
Channel
Selection
Operating
Channel
Security Level
AMG1302/AMG1202-TSeries User's Guide
DESCRIPTION
Select Enable Wireless LAN to activate wireless LAN.
The SSID (Service Set IDentity) identifies the service set with which a wireless device is
associated. Wireless devices associating to the access point (AP) must have the same
SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN.
Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
Select this to keep the wireless clients in this SSID from communicating with each other
through the AMG1302/AMG1202-TSeries.
Select this to keep the wireless clients in this SSID from communicating with clients in
other SSIDs or wired LAN devices through the AMG1302/AMG1202-TSeries.
Select both Client Isolation and MBSSID/LAN Isolation to allow this SSID's wireless
clients to only connect to the Internet through the AMG1302/AMG1202-TSeries.
Set the operating channel manually by selecting a channel from the Channel Selection
list or use Auto to have it automatically determine a channel to use.
This field displays the channel the AMG1302/AMG1202-TSeries is currently using.
Chapter 7 Wireless LAN
93