ZyXEL Communications AMG1202-T10A Quick Start Quide
Wireless n-lite adsl2+ 4-port ethernet gateway
Hide thumbs
Also See for AMG1202-T10A:
- User manual (296 pages) ,
- Quick start manual (7 pages) ,
- Quick manual (2 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ZyXEL Communications AMG1202-T10A
Summary of Contents for ZyXEL Communications AMG1202-T10A
-
Page 1: Quick Start Guide
AMG1202-T10A Quick Start Guide Wireless N-lite ADSL2+ 4-port Ethernet Gateway Firmware Version 1.00 Edition 1, 2/2011 DEFAULT LOGIN DETAILS LAN Port LAN1 ~ LAN4 IP Address http://192.168.1.1 Username admin Password 1234 2011 ZyXEL Communications Corporation www.zyxel.com... - Page 2 Device Panels DSL Internet Ethernet Power LED WLAN/ WPS/WLAN WPS LED LED LEDs 1-4 Button Ethernet Power Power Reset Ports 1-4 DSL Port Socket Switch Button...
- Page 3 Introduction The AMG1202-T10A is an ADSL router with a four-port built-in Ethernet switch and IEEE 802.11n wireless capability. The AMG1202-T10A allows wired and wireless clients to safely access the Internet. INTERNET AMG1202-T10A ADSL Overview • Before You Begin, on page •...
-
Page 4: Before You Begin
JavaScript enabled, or Mozilla Firefox 3 and later versions or Safari 2.0 and later versions. The browser will be used to access the Internet and/or access the AMG1202-T10A Web Configurator. See the User’s Guide for all configuration details including file sharing and setting up a shared printer. -
Page 5: Hardware Connections
2. ETHERNET 1-4: Use an Ethernet cable to connect a computer to this port for initial configuration and/or Internet access. 3. Use the power adaptor provided with your AMG1202-T10A to connect an appropriate power source to this socket. 4. Push the power switch to the on position. -
Page 6: Checking The Leds
AMG1202-T10A and plugged into an appropriate power source. Make sure the power source is turned on. Turn the AMG1202-T10A off, wait for a few seconds and turn it back on. If the LEDs are still off, contact your local vendor. -
Page 7: Initial Configuration
Initial Configuration Enter the information in the wizard exactly as given by your ISP. If no information was given for a field in the wizard, leave it to the default. Open a web browser on the computer. Type "http://192.168.1.1" as the website address. -
Page 8: Internet Setup
If the INTERNET light is off, select Go to Wizard setup and click Apply to display the wizard main screen. Click INTERNET SETUP. Wait while your AMG1202-T10A tries to detect your DSL connection. Follow the directions in the wizard. Enter the settings as specified by your ISP. For... -
Page 9: Wireless Setup
AMG1202-T10A. Wireless Setup To create a wireless network, the AMG1202-T10A and your wireless computer(s) must all use the same SSID (network name), channel and security settings. - Page 10 Make sure your wireless security settings are compatible with your existing wireless devices. See the User's Guide for more information on wireless networks. Go to the Set Up a WPS Connection section if you do not want to use the wireless LAN screen to set up your wireless network.
- Page 11 WPS. Place the device you want to connect near the AMG1202- T10A. Press the WPS button on the AMG1202-T10A for more than 5 seconds. The WPS light blinks. Press the WPS button on a compatible wireless device (such as the NWD2205) within 2 minutes of pressing the WPS button on the AMG1202-T10A.
Need help?
Do you have a question about the AMG1202-T10A and is the answer not in the manual?
Questions and answers