4.1 Overview
This chapter shows you how to use the AMG1302/AMG1202-TSeries's various features.
•
Setting Up Your DSL
•
IPv6 Address
•
Setting Up a Secure Wireless
•
Configuring the MAC Address Filter for Restricting Wireless Internet
•
Setting Up NAT Forwarding for a Game
•
Setting Up NAT Forwarding for a Game
•
Configuring Firewall Rules to Allow a Specified
•
Configuring Static Route for Routing to Another
•
Port Binding
•
Configuring QoS to Prioritize
•
Access the AMG1302/AMG1202-TSeries from the Internet Using
4.2 Setting Up Your DSL Connection
This tutorial shows you how to set up your Internet connection using the web configurator.
If you connect to the Internet through a DSL connection, use the information from your Internet
Service Provider (ISP) to configure the AMG1302/AMG1202-TSeries. Do the following steps:
Connect the AMG1302/AMG1202-TSeries properly. Refer to the Quick Start Guide for details on the
1
AMG1302/AMG1202-TSeries's hardware connection.
Connect one end of a DSL cable to the DSL port of your AMG1302/AMG1202-TSeries. The other end
2
should be connected to the DSL port in your house or a DSL router/modem provided by your ISP.
Connect one end of Ethernet cable to an Ethernet port on the AMG1302/AMG1202-TSeries and the
3
other end to a computer that you will use to access the web configuration.
Connect the AMG1302/AMG1202-TSeries to a power source, turn it on and wait for the POWER
4
LED to become a steady green.
AMG1302/AMG1202-TSeries User's Guide
Connection, see
page 37
Configuration, see
page 39
Network, see
Configuration, see
page 55
Traffic, see
C
H A PT ER
page 40
Server, see
page 48
Server, see
page 48
Service, see
page 50
Network, see
page 53
page 59
DDNS, see
4
Tutorials
Access, see
page 47
page 62
37