ZyXEL Communications AMG1302-T series User Manual page 26

Chapter 2 Introducing the Web Configurator
Table 2 Navigation Panel Summary
LINK
Home
Networking
Static Route
QoS
NAT
Port Binding
Dynamic DNS
Security
Filter
Firewall
Parental Control
26
TAB FUNCTION
LAN Setup Use this screen to configure LAN TCP/IP settings, and other
advanced properties.
Static DHCP Use this screen to assign specific IP addresses to individual MAC
addresses.
IP Alias Use this screen to partition your LAN interface into different logical
networks.
UPnP Use this screen to enable the UPnP function.
IPv6 LAN Setup
Use this screen to configure the IPv6 settings on the AMG1302/
AMG1202-TSeries's LAN interface.
Static Route Use this screen to view and set up static routes on the AMG1302/
AMG1202-TSeries.
IPv6 Static Route Use this screen to configure IPv6 static routes.
General Use this screen to enable QoS and decide allowable bandwidth
using QoS.
Queue Use this screen to configure QoS queue assignment.
Class Setup Use this screen to set up classifiers to sort traffic into different
flows and assign priority and define actions to be performed for a
classified traffic flow.
Game List Use this screen to give priority to traffic for specific games.
General Use this screen to activate/deactivate NAT.
Port Forwarding Use this screen to make your local servers visible to the outside
world.
DMZ
Use this screen to configure a default server which receives
packets from ports that are not specified in the Port Forwarding
screen.
General Use this screen to activate/deactivate port binding.
Port Binding Use this screen to configure and view port binding groups.
Dynamic DNS Use this screen to allow a static hostname alias for a dynamic IP
address.
IP/MAC Filter
Use this screen to configure IPv4/MAC filtering rules for incoming
or outgoing traffic.
IPv6/MAC Filter
Use this screen to configure IPv6/MAC filtering rules for incoming
or outgoing traffic.
General Use this screen to activate/deactivate the firewall.
Default Action
Use this screen to set the default action that the firewall takes on
packets that do not match any of the firewall rules.
Rules
Use this screen to view the configured firewall rules and add, edit
or remove a firewall rule.
Dos
Use this screen to set the thresholds that the AMG1302/
AMG1202-TSeries uses to determine when to start dropping
sessions that are not fully established (half-open sessions).
Parental Control
Use this screen to define time periods and days during which the
AMG1302/AMG1202-TSeries performs parental control and/or
block web sites with the specific URL.
AMG1302/AMG1202-TSeries User's Guide