ZyXEL Communications AMG1302-T series User Manual page 246

Appendix A Setting up Your Computer's IP Address
Installing Components
The Network window Configuration tab displays a list of installed components. You need a
network adapter, the TCP/IP protocol and Client for Microsoft Networks.
If you need the adapter:
In the Network window, click Add.
1
Select Adapter and then click Add.
2
Select the manufacturer and model of your network adapter and then click OK.
3
If you need TCP/IP:
In the Network window, click Add.
1
Select Protocol and then click Add.
2
Select Microsoft from the list of manufacturers.
3
Select TCP/IP from the list of network protocols and then click OK.
4
If you need Client for Microsoft Networks:
Click Add.
1
Select Client and then click Add.
2
Select Microsoft from the list of manufacturers.
3
Select Client for Microsoft Networks from the list of network clients and then click OK.
4
Restart your computer so the changes you made take effect.
5
Configuring
In the Network window Configuration tab, select your network adapter's TCP/IP entry and click
1
Properties
Click the IP Address tab.
2
• If your IP address is dynamic, select Obtain an IP address automatically.
• If you have a static IP address, select Specify an IP address and type your information into
the IP Address and Subnet Mask fields.
246
AMG1302/AMG1202-TSeries User's Guide