ZyXEL Communications AMG1302-T series User Manual page 248

Appendix A Setting up Your Computer's IP Address
• If you do not know your gateway's IP address, remove previously installed gateways.
• If you have a gateway IP address, type it in the New gateway field and click Add.
Click OK to save and close the TCP/IP Properties window.
5
Click OK to close the Network window. Insert the Windows CD if prompted.
6
Turn on your AMG1302/AMG1202-TSeries and restart your computer when prompted.
7
Verifying Settings
Click Start and then Run.
1
In the Run window, type "winipcfg" and then click OK to open the IP Configuration window.
2
Select your network adapter. You should see your computer's IP address, subnet mask and default
3
gateway.
Windows 2000/NT/XP
The following example figures use the default Windows XP GUI theme.
Click start (Start in Windows 2000/NT), Settings, Control Panel.
1
Figure 130 Windows XP: Start Menu
In the Control Panel, double-click Network Connections (Network and Dial-up Connections
2
in Windows 2000/NT).
248
AMG1302/AMG1202-TSeries User's Guide