ZyXEL Communications AMG1302-T series User Manual page 171

Table 59 Security > Filter > IPv6/MAC Filter (continued)
LABEL
Destination Prefix Length
ICMPv6 Type
Protocol
IPv6 / MAC Filter Listing
IPv6 / MAC Filter Rule Index
#
Active
Interface
Direction
ICMPv6 Type
Src IP/PrefixLength
Dest IP/PrefixLength
Mac Address
Protocol
Apply
Delete
Cancel
AMG1302/AMG1202-TSeries User's Guide
DESCRIPTION
Enter the prefix length for the destination IPv6 address.
Select the ICMPv6 message type to filter. The following message types can be
selected:
1 / Destination Unreachable: 0 - no route to destination; 1 -
communication with destination administratively prohibited; 3 - address
unreachable; 4 - port unreachable
2 / Packet Too Big
3 / Time Exceeded: 0 - hop limit exceeded in transit; 1 - fragment
reassembly time exceeded
4 / Parameter Problem: 0 - erroneous header field encountered; 1 -
unrecognized Next Header type encountered; 2 - unrecognized IPv6 option
encountered
128 / Echo Request
129 / Echo Response
130 / Listener Query - Multicast listener query
131 / Listener Report - Multicast listener report
132 / Listener Done - Multicast listener done
143 / Listener Report v2 - Multicast listener report v2
133 / Router Solicitation
134 / Router Advertisement
135 / Neighbor Solicitation
136 / Neighbor Advertisement
137 / Redirect - Redirect message
This is the (upper layer) protocol that defines the service to which this rule
applies. By default it is ICMPv6.
Select the index number of the filter set from the drop-down list box.
This is the index number of the rule in a filter set.
This field shows whether the rule is activated.
This is the interface that the rule applies to.
The filter set applies to this traffic direction.
The ICMPv6 message type to filter.
This displays the source IPv6 address and prefix length.
This displays the destination IPv6 address and prefix length.
This is the MAC address of the packets being filtered.
This is the (upper layer) protocol that defines the service to which this rule
applies. By default it is ICMPv6.
Click this to apply your changes.
Click this to remove the filter rule.
Click this to restore your previously saved settings.
Chapter 14 Filters
171