Manual Station Tuning; Filter Function; Switching The Filter Function On/Off - Becker Traffic Pro 7949 Operating Manual

Manual station tuning

You can set the required frequency
manually.
In the status display, press the rotary
X
control/push button until
or appears on the display
instead of the previous/next station.
3005
X Turn the rotary control/push button
to select the required frequency.
To exit manual station tuning, press and
hold down the rotary control/push
button until
disappears.
The selected frequency remains set.
Note:
Press or to initiate the
search for the next receivable station.

Filter function

You can use this function to filter
stations or entire station chains out of the
station list.
X In the Radio main menu, select
3006
The Filter menu appears.
Turn the rotary control/push button
X
to select one of the following options:
,
or
the stations and station chains which
or
can currently be received.
Radio mode

Switching the filter function on/off

X In the Filter menu, select the
entry.
X Turn the rotary control/push button
to switch the function on ( ) or off
( ).
.
If the function is active ( ), only the
stations and station chains which have
not been filtered out will appear in the
FM station lists.
Note:
If the function is not active, the filter
settings will continue to be maintained.
59