Calling Up The System Settings; Audio; Gal - Becker Traffic Pro 7949 Operating Manual

Other settings:
• You can use
whether an AUX source is connected
to the Traffic Pro instead of a CD
changer.
• You can use
ure the settings for changeover
between day and night design.
• You can use
Traffic Pro to the factory settings.
• You can use
to specify the direction in which lists
and menus are scrolled when the
rotary control/push button is turned.

Calling up the system settings

X Press
to specify
X Turn the rotary control/push button
counter clockwise until
appears at the top right of the
display.
to config-
7014
to reset the
X Press the rotary control/push button
.
7015
X Turn the rotary control/push button
to select one of the following options:
,
X Confirm your selection by pressing
the rotary control/push button
.
,
,
,
or
.

Audio

The Audio section includes system
settings for audio mode.

GAL

GAL is a control circuit on the Traffic
Pro. This control circuit automatically
increases the volume of the Traffic Pro
depending on the speed of the vehicle.
You can define the extent to which the
volume should be increased depending
on the speed of the vehicle here.
X Select in the system settings.
X Select
7016
X Turn the rotary control/push button
to select the required value.
Settings
.
99