Rejecting A Call; Ending A Call - Becker Cascade Operation Manual

Note:
Mute
Selecting deactivates the signal
tone and the previously active source,
radio or media, will be reactivated.
However the call will be indicated until
the caller ends the call.

Rejecting a call

You can reject an incoming call. The
person calling will hear a busy signal.
5019
Select the Reject entry and press the
!
rotary control/push button
The call will be rejected. The status
display of the previously active radio or
media source will be shown.

Ending a call

Active calls can be terminated. For this
purpose, status display must be first be
accessed.
5017
! Press the rotary control/push button
.
The Options menu appears.
5020
! Select the Hang up
.
Press the rotary control/push button
!
.
The call is terminated.
Options menu
The Options menu can be displayed
during an active call. You can end the
call, send DTMF tones or divert the call
to the mobile phone.
In the Telephone status display, press
!
the rotary control/push button
5020
The Options menu appears.
Turn the rotary control/push button
!
Hang up
entry.
DTMF
Private
Telephone mode
to select between
,
and
.
.
101