Canceling Scanning; Skipping A Frequency You Do Not Want Scan (Skip Search Memory) - Yaesu FT1DR Operating Manual

Canceling Scanning

To cancel scanning, press the p switch.
Hints
• Even during scanning, you can adjust the squelch in the following procedure:
Press the F key briefly.
• During scanning, you can finish the squelch adjustment in the following procedure:
Press the F key briefly.
Frequency
band No.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
• For the operation to perform when scanning stops, see "Selecting a Reception Method When
Scanning Stops" on page 57.
• Press the M key more than 1 second to select the Set mode, and then select the following items
for more convenient use:
"7 CONFIG" "3 BEEP"
"7 CONFIG" "3 BEEP"
"5 SCAN" "2 SCAN LAMP": Prevents the LCD from being lit when scanning stops.

Skipping a Frequency You Do Not Want Scan (Skip Search Memory)

Scanning may stop at a frequency that you do not want to receive. Such a frequency
can be skipped by storing it in the "skip search memory". Up to 99 frequencies can be
saved in the skip search memory (memory channels 901 to 999).
Press the T key.
Press the T key.
A-band and B-band reception frequencies
A-BAND
1.8 MHz to 30 MHz
(Shortwave band)
30 MHz to 76 MHz
(50 MHz band )
108 MHz to 137 MHz
(Aviation radio band)
137 MHz to 174 MHz
(144 MHz band)
174 MHz to 222 MHz
222 MHz to 420 MHz
(Information radio band (1))
420 MHz to 470 MHz
(430 MHz band)
470 MHz to 770 MHz
770 MHz to 999 MHz
(Information radio band (2))
"EDGE": Emits a beep when the frequency band edge is reached.
"SELECT": Prevents a beep from being emitted when scanning stops.
Using the Scanning Function
Turn the O knob to adjust the squelch.
B-band
íí
íí
108 MHz to 137 MHz
(Aviation radio band)
137 MHz to 174 MHz
(144 MHz band)
174 MHz to 222 MHz
222 MHz to 420 MHz
(Information radio band (1))
420 MHz to 470 MHz
(430 MHz band)
470 MHz to 770 MHz
íí
YAESU
FCC ID: K6620445X20
IC: 511B-20445X20
MUSEN CO., LTD.
49