Specifying A Skip/Selected Memory Channel - Yaesu FT1DR Operating Manual

Specifying a Skip/Selected Memory Channel

You can specify two types of memory channels, a skip memory channel and a selected
memory channel, for effective memory scanning.
Skip memory channel: You can specify a memory channel that need not be scanned
Selected memory channel: You can specify selected memory channels so that only
1
Select the Memory mode, and then recall the memory
channel you want to specify as a skip memory channel or
a selected memory channel.
Press the M key more than 1 second.
2
The Set mode is selected.
Turn the O knob to select "3 MEMORY".
3
Press the M key briefly.
4
Turn the O knob to select "5 MEMORY SKIP".
5
Press the M key briefly.
6
Turn the O knob to select "OFF", "SKIP", or "SELECT".
7
Press the M key more than 1 second.
8
Press the M key more than 1 second again.
9
The Set mode is canceled.
Hints To cancel a skip/selected memory channel, select [OFF].
When it is canceled, the
during memory scanning.
the specific memory channels are scanned during memory
scanning.
icon on the LCD disappears.
O
Skip memory
channel
[SKP]
[OFF]
FCC ID:
IC: 511B-20445X20
Using the Scanning Function
Stays lit for the skip memory.
Blinks for the selected
memory channel.
Selected memory
channel
[SELECT]
YAESU MUSEN
K6620445X20
53
CO., LTD.