Split Memory; Recalling A Memory Channel - Yaesu FT1DR Operating Manual

Split Memory

Two different frequencies, one for reception and other for transmission, can be
registered to a memory channel.
1
Write a reception frequency into the memory.
Remarks Write the reception frequency with reference to "Writing Data into Memories" above.
2
Select a transmission frequency in the VFO mode.
Press the F key more than 1 second.
3
Turn the O knob to select a channel number.
4
Select the channel number of which you registered a reception frequency.
While pressing the p switch, press the F key briefly.
5
When you recall the memory channel of which you
registered two different frequencies, one for reception and
the other for transmission, the @ icon is displayed on the
LCD.

Recalling a Memory Channel

Recall a registered memory channel in the following procedure:
Press the V key.
1
The Memory mode is selected, and the memory channel
you used last is displayed on the LCD.
Turn the O knob to select a memory channel.
2
Select the memory channel to use next.
Remarks • You can directly recall a memory channel using numeric
keys.
To recall memory channel 15:15V
• Pressing the F key briefly and turning the O knob
allows you to skip channels quickly in step of 10 channels.
Press the V key.
3
The Memory mode is canceled, and the frequency selected in the VFO mode is
displayed.
Hints
• Unregistered memory channels are skipped.
• By default, the priority memory channel used as the priority channel for the dual receive function
was set to the memory channel 1. "P" is displayed at the upper right of the memory channel number
(See page 128).
• The memory content can be transferred to the VFO of the operating band in the following procedure:
Press the F key for 1 second.
the V key.
• Selecting the Memory Only mode in the following procedure allows you to use only memory
channels.
While pressing the V key, press the P key.
To cancel the Memory Only mode, press the V key again while pressing the P key (See page 155).
A Wide Variety of Memory Functions
Press the V key.
"OVERWRITE OK?" is displayed. Press
41