Connecting An External Power Supply For Use In Vehicle - Yaesu FT1DR Operating Manual

Preparation
Approximate Operating Hours and Remaining Charge Level Indication
Approximate hours during which the fully charged battery pack or three new AA alkaline
batteries can operate the FT1DR are as follows:
Band
Amateur radio
band
Remarks Approximate hours are estimated assuming that the FT1DR is operated under the
following conditions. Hours during which the FT1DR can be used actually vary depending
on use conditions, ambient temperature, etc.
• The GPS function is deactivated.
• With an amateur radio band selected, a sequence in which high-power transmission
is performed for 6 seconds, reception is performed for 6 seconds, and the standby
operation is performed for 48 seconds is repeated.

Connecting an External Power Supply for Use in Vehicle

The optional external power supply adapter with
a cigarette lighter plug (E-DC-5B) allows the
FT1DR to be used in a vehicle.
1
Turn off the FT1DR.
2
Insert the plug of the external power supply
adapter with a cigarette lighter plug (E-DC-
5B) in the EXT DC IN jack of the FT1DR.
3
Insert the cigarette lighter plug of the external
power supply adapter with a cigarette lighter
plug (E-DC-5B) in the cigarette lighter socket
of the vehicle.
20
Battery
pack
FNB-101LI
144 MHz Approx. 5.0
band hours
430 MHz Approx. 5.0
band hours
Battery
Batter case
pack
FBA-39
FNB-102LI
Approx. 8.5 Approx. 17
hours hours
Approx.8.0 Approx.16
hours hours
FCC ID: K6620445X20
IC: 511B-20445X20
Icon
< : Full battery power
> : Enough battery power
? : Low battery power
_ : Poor battery power
Charge battery.
_ : Charge battery
immediately.
(Blink)
To cigarette lighter socket
of vehicle
EXT DC IN jack
External power supply
adapter with
a cigarette lighter plug
E-DC-5B (option)
YAESU MUSEN CO., LTD.