Installing/Removing The Battery Pack; Installing The Battery Pack; Removing The Battery Pack - Yaesu FT1DR Operating Manual

Precaution
z Manganese batteries cannot be used. Rechargeable AA batteries cannot be used, either.
z Do not use new batteries along with old batteries. The life of new batteries can decrease.
z If you do not use the FT1DR for a long period, remove the batteries from the battery case.
z If the terminal or electrode of the battery case is dirty, the FT1DR can malfunction due to poor
contact, resulting in overheating or explosion. If the terminal or electrode gets dirty, clean it using a
dry cloth or cotton swab.

Installing/Removing the Battery Pack

Installing the Battery Pack

1
Insert the bottom tabs of the battery in the slots at
the bottom of the FT1DR.
2
Push in the lock knobs until they click.
Precaution
When you use the FT1DR for the first time after purchase or
you have not used it for a long period, charge the battery pack
before use.

Removing the Battery Pack

1
While pushing down the lock knobs, remove the
battery pack.
Push down the lock knobs in the direction of the arrow
shown in the illustration.
Precaution
When releasing the lock knobs, be careful not to hurt your
fingers and nails.
FCC ID: K6620445X20
IC: 511B-20445X20
Preparation
Lock knobs
Push down the lock knobs
in the direction of the arrow.
YAESU MUSEN CO.,
17
LTD.