Programmable Memory Scan (Pms); Writing Into A Programmable Memory; Performing Programmable Memory Scan - Yaesu FT1DR Operating Manual

C4fm fdma 144/430 mhz ual band digital transceiver
Hide thumbs Also See for FT1DR:
Table of Contents

Advertisement

Using the Scanning Function

Programmable Memory Scan (PMS)

Writing into a Programmable Memory

50 sets of PMS memory channels (L1/U1 to L50/U50) are available.
Specify the lower limit frequency of the frequency range you want to san for "L¼", and
the upper limit frequency for "U¼".
Enter a number between 1 and 50 for "¼". Use the same number for the lower and
upper limit channels.
Specify the lower limit frequency and upper limit frequency for the PMS memory
channels according to page 39.
PMS memory channels are located late in the memory channel area. When there are
100 or more memory channels, press the M key to skip memory channels quickly in
steps of 100 memory channels.
Example: Specification of the lower limit frequency "433.200 MHz" and the upper limit
frequency "433.700 MHz" for PMS
Precaution
The difference between the upper limit frequency and the lower limit frequency for PMS must be 100
kHz or more.

Performing Programmable Memory Scan

The programmable memory allows you to scan the specified frequency range in the
same frequency band.
1
Select the Memory mode.
Recall the PMS memory storing the lower limit frequency
or upper limit frequency.
Press the B key, and then turn the O knob to select
2
a PMS channel.
Release the B key.
3
Programmable memory scanning starts.
• Turn the O knob clockwise.:
Hints
Scanning is performed toward higher memory channel
numbers.
Turn the O knob counterclockwise.:
Scanning is performed toward lower memory channel numbers.
• When a signal is received during scanning, scanning stops for 5 seconds and this frequency
is received.
• When scanning is suspended, the decimal point blinks and the LCD stays lit.
• After receiving the frequency for 5 seconds, scanning resumes.
To select another PMS memory , press the B knob to select it while pressing the O.
• To cancel scanning, press the p switch.
56
FCC
ID:
K6620445X20
IC:
511B-20445X20
The decimal point blinks.
YAESU
MUSEN
CO.,
LTD.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents