Restoring The Deleted Memory Channel; Using Memory Banks - Yaesu FT1DR Operating Manual

Press the D key briefly.
5
The memory channel is deleted.
Remarks To delete other memory channels, repeat steps 2-5.
Precaution
z Memory channel 1 cannot be deleted.
Hint
The memory channel specified as a priority memory channel cannot be deleted. Before deleting it,
specify another memory channel as a priority memory.

Restoring the Deleted Memory Channel

You can restore a deleted memory channel.
1
Select the Memory mode.
The memory channel used last is displayed.
Press the F key more than 1 second.
2
Turn the O knob to select the memory channel to restore.
3
Press the D key briefly.
4
The deleted memory channel is restored.

Using Memory Banks

Registered memory channels can be sorted out according to the intended use. The
FT1DR allows you to use 24 types of banks. A maximum of 100 memory channels can
be assigned to each memory bank.
One memory channel can be registered in two or more memory banks. If the memory
channel registered in the memory bank is changed or updated, the content of the
corresponding memory channel in the memory bank is automatically changed or
updated.
Memory channel
FCC
A Wide Variety of Memory Functions
Memory bank
144MHz band is registered.
430MHz band is registered.
Amateur bands are registered together.
AIR band is registered.
YAESU
ID: K6620445X20
IC: 511B-20445X20
43
MUSEN CO., LTD.