Scanning; Scan Resume Options - Yaesu FTM-3207D Advance Manual

Scanning

Scan Resume Options

Select one of the three receiving operations to be performed after the scanning stops.
(1) Restart scanning after receiving the frequency for the set amount of time. Select from
2.0 to 10.0 seconds (0.5 step).
(2) Continue receiving the frequency until the signal disappears, and then restart scan-
ning 2 seconds after the signal disappears (BUSY).
(3) Stop scanning and receive that frequency (HOLD).
1. Press and hold in the [ MHz ( SETUP )] key for
one second to enter the Set mode.
2. Rotate the DIAL knob to select "SCAN RSM
37".
3. Press the [ MHz ( SETUP )] key, then rotate
the DIAL knob to select the desired scan-re-
sume mode.
Default: 5.0 SEC
4. Press and hold in the [ MHz ( SETUP )] key for
one second to save the new setting and exit
to normal operation.
16
VOL
SQL REV
TXPO D W
FTM-3207DR/DE Advance Manual
DIAL
D/A M H z V / M
SETUP M W