Yaesu FT1DR Operating Manual page 83

Set mode item No./Item
7-3 BEEP
7-4 BUSY LED
7-5 CLOCK TYPE
7-6 GPS LOG
7-7 HOME VFO
7-8 LED LIGHT
7-9 LOCK
7-10 MONI/T-CALL
7-11 TIMER
7-12 PASSWORD
7-13 PTT DELAY
7-14 RPT ARS
7-15 RPT SHIFT
7-16 RPT SHIFT FREQ
7-17 SAVE RX
7-18 STEP
7-19 DATE & TIME ADJ
7-20 TOT
7-21 VFO MODE
7-22 VIBRATOR
8 APRS
8-1 APRS AF DUAL
Description of function
Set up the beep output function
and the function of emitting a
beep when a band edge/CH1 is
encountered.
Turn on/off the BUSY LED
Select a clock type.
Set the duration of GPS access.
Enable/disable VFO transfer via
the home channel.
Turn on/off the white LED
flashlight.
Select a lock mode.
Select a monitor switch or
T-CALL switch.
Set the power ON/OFF timer.
Turn on/off the password
function.
Set the PTT delay time.
Turn on/off the ARS function.
Select a repeater shift direction.
Select a repeater shift width.
Set the reception save time.
Select a channel step.
Set up the built-in clock function.
Set the timeout timer.
Select the frequency selection
range in the VFO mode.
Select a vibrator mode and set up
the vibrator function.
Turn on/off the muting function
when both the APRS function and
AF dual function are active.
FCC ID:
IC:
Option
(Bold letters: Default)
SELECT:
KEY&SCAN / KEY / OFF
EDGE: OFF / ON
A BAND: ON / OFF
B BAND: ON / OFF
RADIO: ON / OFF
A / B
OFF / 1 SEC / 2 SEC / 5 SEC /
10 SEC / 30 SEC / 60 SEC
ENABLE / DISABLE
WHITE LED ON
KEY&DIAL / PTT / KEY&PTT /
DIAL&PTT / ALL / KEY / DIAL
MONI / T-CALL
ON: 00:00 to 23:59 ON / OFF
OFF: 00:00 to 23:59 ON / OFF
ON / OFF [ – – – – ]
OFF / 20ms / 50ms / 100ms /
200ms
ON / OFF
SIMPLEX / –RPT / +RPT
0.000 MHz to 150.000 MHz
OFF / 0.2 SEC (1:1) to 60.0 SEC
(1:300)
AUTO / 5.0KHZ to 100KHz
–
OFF / 30 SEC to 10 MIN 00 SEC
ALL / BAND
MODE:
OFF / BUSY / SIGNALING
SELECT:
MODE1 / MODE2 / MODE3
ON / OFF
YAESU MUSEN
K6620445X20
511B-20445X20
Set Mode
Reference
page
83
CO., LTD.