Scanning; Scan Resume Options - Yaesu FTM-7250DE Advance Manual

Scanning

Scan Resume Options

Select one of the three receiving operations to be performed after the scanning stops.
(1) Restart scanning after receiving the frequency for the set amount of time. Select from
2.0 to 10.0 seconds (0.5 step).
(2) Continue receiving the frequency until the signal disappears, and then restart scan-
ning 2 seconds after the signal disappears (BUSY).
(3) Stop scanning and receive that frequency (HOLD).
1. Press and hold the [ MHz ( SETUP )] key to enter the
Set mode.
2. Rotate the DIAL knob to select "SCAN RSM 39".
3. Press the [ MHz ( SETUP )] key, then rotate the DIAL
knob to select the desired scan-resume mode.
Default: 5.0 SEC
4. Press and hold the [ MHz ( SETUP )] key to save the
new setting and exit to normal operation.
19