Yaesu FT1DR Operating Manual page 81

Set mode item No./Item
2-2-7 DSP Ver
2-3 AUDIO
2-3-1 MIC GAIN
2-3-2 MUTE
2-3-3 RX AF DUAL
2-3-4 VOL MODE
3 MEMORY
3-1 BANK LINK
3-2 BANK NAME
3-3 MEMORY NAME
3-4 MEMORY PROTECT
3-5 MEMORY SKIP
3-6 MEMORY WRITE
4 SIGNALING
4-1 BELL
4-2 DCS CODE
4-3 DCS INVERSION
Description of function
T.B.D.
Adjust the microphone level.
Set the muting level on the non-
operating side when a signal is
received on the operating band
side.
Select a mode for simultaneous
reception of a radio broadcast.
Select a v key function.
Set up a memory bank.
Assign a name to a memory
bank.
Write a memory tag.
Enable/disable writing into the
memory.
Assign a skip/selected memory.
Select an auto increment mode
for memory writing.
Set up the bell function.
Select a DCS code
Select a combination of DCS
inversion codes in terms of
communication direction.
FCC ID:
IC:
Option
(Bold letters: Default)
T.B.D.
LEVEL 1 to LEVEL 9
OFF / MUTE 30% /
MUTE 50% / MUTE 100%
1-SEC COMMUNICATION to
10-SEC COMMUNICATION/
FIXED / 1-SEC TRANSMISSION
to 10-SEC TRANSMISSION
NORMAL / AUTO BACK
BANK 1 to BANK 24, BANK LINK
ON / OFF
BANK 1 to BANK 24
Max. 16 characters
OFF / ON
OFF / SKIP / SELECT
NEXT / LOWER
RINGER: OFF / BELL
SELECT: ONCE to 20 TIMES/
CONTINUOUS
DCS 023 to DCS 754
RECEPTION – IN-PHASE,
TRANSMISSION – IN-PHASE
RECEPTION –
INVERTED PHASE,
TRANSMISSION – IN-PHASE
RECEPTION – BOTH-PHASE,
TRANSMISSION – IN-PHASE
RECEPTION – IN-PHASE,
TRANSMISSION –
INVERTED PHASE
RECEPTION – INVERTED
PHASE,
TRANSMISSION –
INVERTED PHASE
RECEPTION – BOTH-PHASE,
TRANSMISSION –
INVERTED PHASE
YAESU MUSEN
K6620445X20
511B-20445X20
Set Mode
Reference
page
81
CO., LTD.