What is GPS?
GPS (Global Positioning System) is a space-based satellite navigation system that
provides location and time information anywhere on the earth. It was developed by the
U.S. Department of Defense as a military system. It receives signals from three or more
of about 30 GPS satellites flying at an altitude of about 20,000 km, and displays the
current position (latitude, longitude, and altitude) within a tolerance of several meters. In
addition, GPS can receive the exact time from the satellite's onboard atomic clock.
Activating the GPS Function
To activate the GPS function, select "8 APROS"
"GPS ON" in the Set mode.
Hint
• Default: ON
When the GPS function of the FT1DR is turned ON, internal clock settings and position
settings for your station are automatically obtained from the GPS data.
Precaution
z Data for the current day of the week is not automatically obtained. Set the day of the week manually
with reference to page
Press the M key over 1 second.
1
The Set mode is selected.
Turn the O knob to select "8 APRS".
2
Press the M key briefly.
3
Turn the O knob to select "16 GPS POWER".
4
Press the M key briefly.
5
Turn the O knob to select "GPS ON".
6
Press the M key for more than 1 second.
7
The GPS function is turned ON.
Press the M key for more than 1 second again.
8
The Set mode is canceled.
58
Using the GPS Function
Using the GPS Function
.
FCC
IC:
"23GPS POWER", and then select
YAESU
ID:
K6620445X20
511B-20445X20
MUSEN
CO.,
LTD.