Scanning Only The Selected Memory Channel; Scanning A Memory Bank - Yaesu FT1DR Operating Manual

Using the Scanning Function

Scanning Only the Selected Memory Channel

1
Select the Memory mode, and then recall the selected
memory channel.
While pressing the B key, turn the O knob to specify
2
the scanning range.
Hints For the scanning range to be specified, see the table on page
66.
Release the B key.
3
Hints • Scanning (SCAN) is performed toward higher memory channel numbers.
• Only the selected memory channel is scanned.
• If a signal is received during scanning, a beep is emitted and scanning stops for 5 seconds
to receive the current frequency.
• While scanning is suspended, the decimal point blinks and the display stays lit.
• After receiving the frequency for 5 seconds, scanning resumes.
• To cancel scanning, press the p key briefly.

Scanning a Memory Bank

Only the memory channels in the recalled memory bank can be scanned.
Press the V key.
1
The Memory mode is selected.
Press the B key briefly.
2
Recall a memory bank.
Pressing the B key briefly toggles between "MEMORY NO." and "BANK (No.)".
To recall another memory bank, press the F key briefly, and the press the B key briefly.
Hints
Turn the O knob to select a memory bank.
3
Select a memory bank from among BANK 1 to BANK 24.
Press the B key briefly.
4
The selected memory bank is determined.
While pressing the B key, turn the O knob to specify the scanning range.
5
Hints For the scanning range to be specified, see the table on page 66.
Release the B key.
6
Scanning (SCAN) is performed toward higher memory channel numbers.
• Turn the O knob clockwise.:
Hints
Scanning is performed toward higher memory channel numbers.
Turn the O knob counterclockwise.:
Scanning is performed toward lower memory channel numbers.
• When a signal is received during scanning, scanning stops for 5 seconds and this frequency
is received.
• When scanning is suspended, the decimal point blinks and the LCD stays lit.
• After receiving the frequency for 5 seconds, scanning resumes.
• To cancel scanning, press the p switch.
54
FCC ID: K6620445X20
IC: 511B-20445X20
YAESU MUSEN CO., LTD.