Specifying Settings To Limit The Use Of Communication Modes-2 (Mode 476) - Konica Minolta bizhub 362 User Manual

Utility mode
Specifying settings to limit the use of communication modes–2 (mode
476)
Specify whether to permit or prohibit the use of individual communication
modes. Prohibited communication modes do not appear in their selection
screens.
Note
Programmed one-touch dial buttons can be used for transmission even
if a prohibited communication mode has been specified.
If all communication modes are prohibited (modes 475 to 477), some
screens, such as those for specifying transmission settings, may not nor-
mally be displayed.
Settings at time of purchase
Bit
Setting
Specifying the setting
During the production of this unit, the settings in the shaded cells were se-
lected. The numbers on the right side indicate the page numbers with de-
scriptions for the corresponding function.
Bit
7
6
5
4
3
362/350/282/250/222
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0 (HEX: 00)
Description Setting
Specifies whether or 0
not the use of the
1
Scan to SMB opera-
tion is prohibited.
Specifies whether or 0
not the use of SMB
1
printing is prohibit-
ed.
Specifies whether or 0
not the use of G3
1
faxing is prohibited.
Specifies whether or 0
not the use of the
1
Scan to HDD opera-
tion is prohibited.
Specifies whether or 0
not the use of the
1
Scan to E-Mail oper-
ation is prohibited.
Description
Permitted
Prohibited
Permitted
Prohibited
Permitted
Prohibited
Permitted
Prohibited
Permitted
Prohibited
10
Page Refer-
ence
----------
----------
----------
----------
----------
10-97